WLD3343 2.2 A Lower Noise Laser Diode Driver

  • Small Size: 1.30" X 1.28" X 0.313"
  • Slow Start Laser Diode Protection
  • TTL Compatible Shutdown Pin
  • Adjustable Laser Diode Current Limit
  • Over temperature output shutdown
  • 2.5 times lower noise than WLD3343 (26 µA)
  • Up to 2.2 A CW laser diode current
  • Constant Current Mode Only
  • Voltage Controlled Setpoint
  • Bandwidth 2 MHz (CC, sine wave)

From: $124.00

Bulk Pricing (2 - 9): $114.00

Contact Factory for OEM Pricing
Price adjustments will be reflected in the cart. For availability information please contact us. All prices are in US dollars and are subject to change without notice. Prices do not include shipping charges. An additional OEM discount applies on orders over 9 pieces. Contact factory for pricing. If ordering from or shipping to Australia, China, Hong Kong or Israel please contact your distributor.

The WLD3343-2L is a general purpose laser diode driver that maintains precision laser diode current (Constant Current mode) using electronics that are compatible with any laser diode type. It is designed for lower noise operation compared to the standard WLD3343. It delays and slowly ramps the current for maximum protection. Supply up to 2.2 A of current to your laser diode from a single +5 V power source.

An internal thermostat shuts down the WLD safely if the device temperature exceeds 105°C. Remotely enable or disable current. Zero leakage current allows operation with VCSELs. Current range is scaled by an external resistor.

To operate from 3.6 V (for Lithium-Ion batteries) try the WLD3343HB. For 2.2 or 3 A operation in Constant Current or Constant Power mode, the WLD3343 or WLD3343-3A are available. To drive with lower noise up to 3 a in Constant Current Mode only, the WLD3343-3L is available. A circuit calculator tool speeds selection of external component values (see Design Tools tab). An evaluation board is available to simplify prototyping: WLD3393. Heatsinking solutions to use the WLD3343-2L at full current are available.

This laser diode driver is ideal for applications where space is tight. It is widely used in electro-optic qualificationRaman spectroscopy, medical diagnostic equipment, range finders, eye-safe atmospheric lidar and on research benches.

Free, effective, and responsive technical support is available to simplify integration of Wavelength products into your OEM design. Standard product can be easily modified to meet your application requirements.

1 Hour Current Stability at ambient 25°C: 200 ppm

Supply Range: +5 to +12 V

Package: 14 pin DIP PCB mount (33 x 32 x 8 mm)

Laser Diode Output Current: up to 2.2 A

Delay: 240 msec.
Current Ramp: 10 msec
Rise time: 460 nsec
Fall time: 320 nsec
Noise: 26 µA (100 mA, 100 kHz)

TTL Compatible RESET / ENABLE input is active LO.

Bandwidth: 2 MHz – Constant Current sine wave

Maximum Power Dissipation 9 W (with full thermal kit)

Heatspreader Temperature Rise: 30°C / W without external heatsinking

Circuit Diagram Example: WLD3343 in Constant Current mode with a Type A/B Laser Diode (Top View)


WEV300WEV300 Thermal Solution Kit$23
WEV301WEV301 Thermal Solution Kit with +5 V Fan$48
WEV302WEV302 Thermal Solution Kit with +12 V Fan$48


WLD3393Evaluation PCB for WLD3343 Laser Diode Driver$165
WHS302WHS302 Heatsink for WXX Controllers$15
WTW002WTW002 Thermal Washer for Wxx Controllers$3
WXC303WXC303 +5 V Fan$29
WXC304WXC304 +12 V Fan$29
WXC305WXC305 Screw Kit$6

Related Parts

WLD3343WLD3343 2.2 A Laser Diode Driver$99WLD3343 2.2 A Laser Diode Driver
WLD3343-3AWLD3343 3 A Laser Diode Driver$124WLD3343 3 A Laser Diode Driver
WLD3343-3LWLD3343 3 A Lower Noise Laser Diode Driver$134WLD3343 3 A Lower Noise Laser Diode Driver
WLD3343HBWLD3343HB 2.2 A Li+ Battery Laser Diode Driver$105WLD3343HB 2.2A Li+ Battery Laser Diode Driver
WHY5640WHY5640 2.2 A Temperature Controller$78WHY5640
WTC3243WTC3243 2.2 A Temperature Controller$97wtc3243
WTC3243HBWTC3243HB 2.2 A Li+ Battery Temperature Controller$104WTC3243