Evaluation PCB for WLD33ND 2A & 2L Laser Diode Drivers


From: $150.00

Bulk Pricing (6 - 14): $147.00

Contact Factory for High Volume Pricing
Price adjustments will be reflected in the cart. For availability information please contact us. All prices are in US dollars and are subject to change without notice. Prices do not include shipping charges. An additional OEM discount applies on orders over 14 pieces. Contact factory for pricing. If ordering from or shipping to Australia, China, or Hong Kong, please contact your distributor.

Use the WLD33ND-2AEV Evaluation Board to rapidly prototype a complete laser diode control system using the cutting edge technology of the WLD33ND Laser Diode Driver. Onboard switches, connectors, and trimpots make configuration and operation simple. Input and output cables are also included. For lower noise operation use the WLD33ND-2L. For lower voltage operation compatible with Li-Ion batteries, the WLD33ND-HB can be used. This evaluation board does not include the controller.

Adjust laser diode forward current (Constant Current Mode) or monitor photodiode current (Constant Power Mode) using the 12-turn onboard current setpoint trimpot. Laser Diode current range (200 mA or 2 A) and Photodiode current range (200 µA or 2 mA) are configurable. It works with A, B, and C type laser diodes. A trimpot configures the laser diode forward current limit. A switch sets mode as either Constant Current or Constant Power. Power it through the terminal strip or using the 2.5 mm circular connector and the PWRPAK-5VPWRPAK-7VPWRPAK-9V, or PWRPAK-12V power supplies. The input cable set allows easy connection to your power supply and monitoring equipment while the output cable set quickly connects to your laser diode and monitor photodiode. High power applications can use the onboard fan connector to power a WXC303 or WXC304 (+5 V or +12 V DC fan) attached to a WHS302 heatsink.

The LDMOUNT-5A, a 14-pin butterfly laser diode mount with integrated heat sinking, is available for simple connections between the WLD3393 and the laser.

This driver board is widely used in electro-optic qualification, spectrometers, medical diagnostic equipment, range finders, and on research benches.

Free, effective, and responsive technical support is available to simplify integration of Wavelength products into your OEM design. Standard product can be easily modified to meet your application requirements.

Size: 2.25 x 2.25 x 1.13″ (with standoffs and WLD without thermal kits installed)
57 x 57 x 29 mm

Top View of WLD33ND-2AEV

WLD33ND-2AEV Top View


WEV300WEV300 Thermal Solution Kit$23
WEV301WEV301 Thermal Solution Kit with +5 V Fan$48
WEV302WEV302 Thermal Solution Kit with +12 V Fan$48


PWRPAK-5VSwitching Power Supply 6 A, 5 V$156
PWRPAK-7VSwitching Power Supply 3 A, 7.2 V$156
PWRPAK-9VSwitching Power Supply 3 A, 9 V$156
PWRPAK-12VSwitching Power Supply 2.5 A, 12 V$156
WHS302WHS302 Heatsink for WXX Controllers$15
WTW002WTW002 Thermal Washer for Wxx Controllers$3
WXC303WXC303 +5 V Fan$31
WXC304WXC304 +12 V Fan$31
WXC305WXC305 Screw Kit$6
LDMOUNT-5ALDMOUNT 5A Butterfly Laser Diode Mount$599
WCB318WCB318 LDMOUNT Cable for the WLD3343$89

Related Parts

WLD33NDWLD33ND 2.2 A Laser Diode Driver$99
WLD33ND-2LWLD33ND 2.2 A Lower Noise Laser Diode Driver$124
WLD33ND-HBWLD33ND-HB 2.2 A Li+ Battery Laser Diode Driver$105