HTC4000-62 4 A Low Profile OEM Temperature Controller

  • Compatible with 0.062" thick PCBs
  • Drive ±4 A of TEC or RH current
  • Linear Stability: 0.0009° C
  • Low profile: 1.6" x 2.65" x 0.34"
  • Heat and cool current limits
  • Supports Thermistors, RTDs, IC sensors
  • Single supply operation: +5 to +12 V
  • 20 pin SIP PCB mount
  • Adjustable sensor bias current
  • Monitor Actual and Setpoint Temperatures

From: $119.00

Bulk Pricing (2 - 9): $113.00

Contact Factory for OEM Pricing
Price adjustments will be reflected in the cart. For availability information please contact us. All prices are in US dollars and are subject to change without notice. Prices do not include shipping charges. An additional OEM discount applies on orders over 9 pieces. Contact factory for pricing. If ordering from or shipping to Australia, China, Hong Kong or Israel please contact your distributor.

The advanced and reliable circuitry of the HTC4000 drives up to ±4.0 A with 0.0009°C temperature stability in a low profile package that can be mounted in a number of different ways.

Several HTC models are available: the HTC1500-62 drives up to ±1.5 A, and the HTC3000-62 drives up to ±3.0 A. These models are for use with 0.062″ thick printed circuit boards (PCBs). Other models are available for use with 0.031″ thick PCBS: HTC1500 (1.5 A) or HTC3000 (3 A).


The low profile package is ideal for designs with tight space constraints. The heatsink can be bolted directly to the HTC, or the module can be bolted directly to the equipment chassis to maximize space efficiency.

The HTC temperature controllers are easily configured for any design. Virtually any type of temperature sensor can be used with the HTC, and a built-in sensor bias current source simplifies use with resistive temperature sensors. The independently adjustable Proportional Gain (P) and Integrator Time Constant (I) can be modified to optimize temperature overshoot and stability.

  • A single external resistor is used to set the output current limit, and an onboard voltage reference can be used with a potentiometer to control the temperature setpoint.
  • The HTC can be electrically connected to a 0.062″ thick PCB or by using a SIP connector and cable.
  • Monitor pins provide access to temperature setpoint voltage and actual sensor voltage.

Free, effective, and responsive technical support is available to simplify integration of Wavelength products into your OEM design. The standard product can be easily modified to meet your application requirements.

Supply Range:+5 to +12 V
Contact Tech Support for up to +20 V operation.

Temperature Control Output Current: up to ±4.0 A
Temperature Stability: 0.0009°C (10 kΩ thermistor at 25°C) over one hour
Stability across ambient: 0.002°C (10 kΩ thermistor at 25°C) over an hour – Ideal for scanning applications

Setpoint vs. Actual Temperature Accuracy: 2 mV typical

-Heat and Cool Current Limits
-PI controller minimizes overshoot and time to temperature
-Compatible with multiple sensors
-Adjustable sensor bias current optimizes sensor feedback voltage
-Can operate with unipolar current for Resistive Heaters

Maximum Power Dissipation: 17 W

20 pin SIP PCB Mount size: 41 x 67 x 8.6 mm
Compatible with 0.062″ thick printed circuit boards (PCBs).

Top View of HTC Temperature Controller

Connection Diagram of HTC Temperature Controller


Related FAQs

FAQ1007: What limits the temperature control range of a temperature controller?
FAQ1009: Why won't my temperature controller settle my load to temperature?
FAQ1010: Why does it take so long to settle to the setpoint temperature?
FAQ1011: Why won't my load stabilize to your temperature controller specification?
FAQ1012: Why is my load heating when it should be cooling?
FAQ1014: What DC power supplies do you recommend to achieve the stability specifications listed in your manuals?
FAQ1015: Should I use a switching power supply for my application?
FAQ1016: How do I view and print your manuals on-line?
FAQ1017: An empty screen appears when I try opening a PDF manual. What does this mean?
FAQ1019: Which address do I use to remit payment or a purchase order?
FAQ1022: Where do I send my unit for repair or calibration?
FAQ1085: Do the temperature controllers always provide full current to the driven element (a TEC or Peltier device, or resistive heater) when the actual temperature does not equal the set point temperature?
FAQ1117: The temperature of my resistive heater is slow to stabilize and is not within specification.
FAQ1120: What does the Compliance Voltage specification in temperature controllers mean?
FAQ1121: How do I install a remote Enable/Disable Switching Circuit?
FAQ1128: What is the best way to wire a resistive heater to my temperature controller to gain compliance voltage?
FAQ1158: What software can I use for mechanical downloads?
FAQ1161: What are some important parameters to consider before purchasing a product?
FAQ1163: How does grounding the thermoelectric cooler cable on temperature controllers affect the noise level?
FAQ1171: How do I connect multiple drivers or controllers to a single power supply?


THERM-PSTThermal Paste$19
HTCEVALEvaluation PCB for HTC Series Temperature Controllers$188
HTCHTSKHeatsink for HTC Series Temperature Controllers$28
PWRPAK-5VSwitching Power Supply 6 A, 5 V$156
PWRPAK-7VSwitching Power Supply 3 A, 7.2 V$156
PWRPAK-9VSwitching Power Supply 3 A, 9 V$156
PWRPAK-12VSwitching Power Supply 2.5 A, 12 V$156
TCS610TCS610 10 kΩ Thermistor (2x3mm) Sold in 10-packs$97
TCS620TCS620 20 kΩ Thermistor (2x3mm) Sold in 10-packs$97
TCS650TCS650 50 kΩ Thermistor (2x3mm) Sold in 10-packs$97
TCS651TCS651 100 kΩ Thermistor (2x3mm) Sold in 10-packs$97
TCS10K5TCS10K5 10 kΩ Thermistor (0.5x3mm) Sold in 5-packs$97

Related Parts

HTC1500HTC1500 1.5 A Low Profile OEM Temperature Controller$97HTC1500
HTC1500-62HTC1500-62 1.5 Amp Low Profile OEM Temperature Controller$97HTC1500
HTC3000HTC3000 3 A Low Profile OEM Temperature Controller$100HTC3000
HTC3000-62HTC3000-62 3 A Low Profile OEM Temperature Controller$100HTC3000