Applies To These Products

MPT2500
MPT5000
MPT10000

Question

On the MPT, is the analog ground (Pin 5) internally connected to the power supply ground (pins 14 & 15)?

Answer

Yes, Pin 5 is internally connected to pins 14 & 15 but this is a low-current connection.

Related Downloads

MPT Series Product Datasheet

Related FAQs

FAQ1103: Is it possible to apply a negative voltage to the Analog Input (pin 5) on the MPT Series Controllers?
FAQ1101: I have a question related to the use of the Analog Input of an MPT10000 temperature controller with an RTD. The sensor we are using is a PT100, with the sensor bias current set for 1 mA.

We want to change the set point temperature using an external voltage applied to the Analog Input (Pin 6 on the MPT Series Temperature Controllers). We would like to set the set point to 20°C, and apply an analog input that will change the set point up to 40°C or down to 0°C.
New Search Submit a new question