High Precision, Ultra Stable Temperature Controllers,
Quantum Cascade & Diode Laser Drivers
     
My Cart
HOME PRODUCT SELECTOR
 

LDTC2/2O Laser Driver & Temp Controller

 
Temperature Sensors and Laser Diodes supported
RoHS Compliant RoHS Compliant RoHS Compliant
2.2 A of TEC and 2.2 A of LD current
Single supply operation LD: +5 to +12 V
Single supply operation TC: +5 to +28 V
Slow start laser diode protection
Constant Current or Constant Power Mode
Adjustable laser diode current limit
Separate heat & cool current limits
Remote TTL Shutdown / Interlock
Size: 2.5" x 4" x 1"
Failsafe Setpoint default for D/A
LDTC2/2O Laser Driver & Temp Controller
Quantity 1 2 - 9 10-24
Prices $ 415.00 $ 370.00 OEM Contact Factory
To order use part number: LDTC 2-2 O
Prices are in US dollars.
 
Request a quote from factory or distributorRequest Quote
Add to Cart
Sometimes discounted stock is available Discount Stock
Technical detail about product Datasheet
The LDTC2/2 includes both a Laser Diode Driver and a Temperature Controller that each drive up to 2.2 Amps. The LDTC 2/2 O is the open frame version without the chassis enclosure. The LDTC 2/2 E includes the electronics and chassis. For 500 mA laser diode current, the LDTC0520 is available. For 1 A laser diode current, the LDTC1020 is available. Integrated controls make this a plug-and-play module. Add only a power supply, laser diode, thermoelectric and sensor, and heatsinking. All cable sets are included.

The temperature controller is compatible with thermistors or linear temperature sensors such as the LM335 or AD590. Adjust temperature using onboard trimpot or a remote voltage input. This voltage input has added default protection for when a D/A remote setpoint is turned off, unplugged or goes down and it automatically sets the temperature to control near ambient. Default is 25°C for a 10 kΩ thermistor (1 V). Adjustable trimpots configure heat and cool limits.

The laser diode driver maintains precision laser diode current (Constant Current mode) or stable photodiode current (Constant Power mode) using electronics compatible with A/B Type lasers. The LDTC2/2 delays and slowly ramps the current for maximum protection. Onboard trimpots set current limit and setpoint. Alternately, you can switch to remote inputs for the laser driver current setpoint. Use either the onboard Enable/Disable switch or a remote input. An LED indicates status of the laser diode output current. Switches select Constant Current or Constant Power mode.

Ideal for integrated laser driver or LED packages that include temperature control, often used in medical diagnostics equipment, remote sensing, analytical instrumentation, military and communications applications.

Free, effective, and responsive technical support is available to simplify integration of Wavelength products into your OEM design. Standard product can be easily modified to meet your application requirements.
PRIVACY POLICY Copyright © 2008-2017 by Wavelength Electronics, Inc.
This site is optimized for Mozilla Firefox 30.0 and IE 9.0, minimum versions.

SITE MAP
LinkedIn, the LinkedIn logo, the IN logo and InMail are registered trademarks or trademarks of LinkedIn Corporation and its affiliates in the United States and/or other countries. LabVIEW is a trademark of National Instruments.