High Precision, Ultra Stable Temperature Controllers,
Quantum Cascade & Diode Laser Drivers
     
My Cart
HOME PRODUCT SELECTOR
 

MPL2500 Laser Diode Driver

 
Laser Diode Schematics
RoHS Compliant RoHS Compliant RoHS Compliant
Low Noise - up to 2.5 A LD current
Operates all LD / PD pin configurations
Single supply operation: +12 to +15 V
Slow Start & Current Limit Protection
Mechanical Relay Protection
RMS Noise and Ripple: < 10 μA
24 hour Current Stability: < 75 ppm
Constant Current or Constant Power Mode
Onboard setpoint and limit controls
Size: 3.55 x 3.5 x 1" chassis mount
MPL2500 Laser Diode Driver
Quantity 1 2 - 9 10-24
Prices $ 369.00 $ 309.00 OEM Contact Factory
To order use part number: MPL2500
Prices are in US dollars.
 
Request a quote from factory or distributorRequest Quote
Add to Cart
Sometimes discounted stock is available Discount Stock
Technical detail about product Datasheet
The MPL2500 is a very low noise laser diode driver. It operates from +12 to +15 V and is very easy to set up for any laser diode / photodiode configuration. Cabling to the female Dsub15 connector is available: WCB102. For evaluating the unit on a benchtop, the MULTI-HTSK, multipurpose heatsink is available. Higher efficiency laser diode drive is available in pcb mount packages: PLD1250 (1.25 A), PLD5000 (5 A), PLD6500 (6.5 A), PLD10000 (10 A), PLD12500 (12.5 A), or in chassis mount packages: PLD5K-CH (5 A), PLD10K-CH (10 A), or PLD12.5K-CH (12.5 A).

Two photodiode ranges provide variable sensitivities for optimum operation. You can maintain excellent stabilty when operating in both constant current and constant power mode. Setpoint and current limit trimpots are easilly accessible and offer precision control. A slow start circuit, mechanical shorting relay, and current limit offer maximum protection for your laser diode even when power is removed. The level of current set by the current limit is always drawn from the DC power supply.

The MPL2500 is used in electro-optical equipment.

Free, effective, and responsive technical support is available to simplify integration of Wavelength products into your OEM design. Standard product can be easily modified to meet your application requirements.
PRIVACY POLICY Copyright © 2008-2017 by Wavelength Electronics, Inc.
This site is optimized for Mozilla Firefox 30.0 and IE 9.0, minimum versions.

SITE MAP
LinkedIn, the LinkedIn logo, the IN logo and InMail are registered trademarks or trademarks of LinkedIn Corporation and its affiliates in the United States and/or other countries. LabVIEW is a trademark of National Instruments.