 |
Use the WLD3393 Evaluation Board to rapidly prototype a complete laser diode control system using the cutting edge technology of the WLD3343 Laser Diode Driver. Onboard switches, connectors, and trimpots make configuration and operation simple. Input and output cables are also included. For lower voltage operation compatible with Li-Ion batteries, the WLD3343HB can be used. This evaluation board does not include the WLD3343.
Adjust laser diode forward current (Constant Current Mode) or monitor photodiode current (Constant Power Mode) using the 12-turn onboard current setpoint trimpot. Laser Diode current range (200 mA or 2 A) and Photodiode current range (200 µA or 2 mA) are configurable. It works with A, B, and C type laser diodes. A trimpot configures the laser diode forward current limit. A switch sets mode as either Constant Current or Constant Power. Power it through the terminal strip or using the 2.5 mm circular connector and the PWRPAK-5V, PWRPAK-7V, PWRPAK-9V, or PWRPAK-12V power supplies. The input cable set allows easy connection to your power supply and monitoring equipment while the output cable set quickly connects to your laser diode and monitor photodiode. High power applications can use the onboard fan connector to power a WXC303 or WXC304 (+5 V or +12 V DC fan) attached to a WHS302 heatsink.
The prior revision of the board was black. Click here for the datasheet for that revision.
Free, effective, and responsive technical support is available to simplify integration of Wavelength products into your OEM design. Standard product can be easily modified to meet your application requirements.
|
|
